Medusa Box Software v.2.4.9 is out! Added boot repair via USB for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R...

2015-02-27 19:48:02

Medusa Box Software v.2.4.9 is out!

We have added boot repair via USB and small TP for LG G3 D851, G2 Mini LTE-A D620, LG D620K, LG D620R
and via JTAG for ViewSonic ViewPad 7 (VS13761).

Medusa Box Software v.2.4.9 Release Notes:

  • Added support for the following models:
    • LG D851 - added Dead Boot / Device Repair via USB
    • LG D620 - added Dead Boot Repair via USB
    • LG D620K - added Dead Boot Repair via USB
    • LG D620R - added Dead Boot Repair via USB
    • ViewSonic ViewPad 7 (VS13761) - added Dead Boot / Device Repair via JTAG (thanks to Mr. Dr_Wolodya)
  • Uploaded new Full Flash and Repair files for ZTE MF100 (128MB) (thanks to Mr. Dr_Wolodya)
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

Download Medusa Box Software v.2.4.9