Medusa Box v.2.4.4 is out! We have added boot repair via USB and small TP for LG D150, D157F, D160, D160F, D160G and more!

2015-01-09 15:39:22

Medusa Box v.2.4.4 is out!

We have added boot repair via USB and small TP for LG D150, D157F, D160, D160F, D160G,
which are detected by PC as "Qualcomm HS-USB QDloader 9008" device!
Also added repair via JTAG interface for Samsung SGH-T479B and ZTE V880G.

Medusa Box v.2.4.4 Release Notes:

  • Added support for the following models:
    • LG D150 - added Dead Boot/Device Repair via USB
    • LG D157F - added Dead Boot Repair via USB
    • LG D160 - added Dead Boot/Device Repair via USB
    • LG D160F - added Dead Boot Repair via USB
    • LG D160G - added Dead Boot Repair via USB
    • Samsung SGH-T479B - added Dead Boot/Device Repair
    • ZTE V880G - added Dead Boot Repair (thanks to Mr. Dr_Wolodya)
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

Download Medusa Box v.2.4.4