Medusa Box Software v.2.4.8 is out! Added support for LG E960, F200K, F200L, F200S, F200LS and Samsung GT-B5512.

2015-02-13 16:43:12

Medusa Box Software v.2.4.8 is out!

We have added boot repair via USB and small TP for LG E960, F200K, F200L, F200S, F200LS
and via JTAG for Samsung GT-B5512 and LG F200L.

Medusa Box Software v.2.4.8 Release Notes:

  • Added support for the following models:
    • LG E960 - added Dead Boot / Device Repair via USB
    • LG F200K - added Dead Boot Repair via USB
    • LG F200L - added Dead Boot Repair via USB / JTAG
    • LG F200LS - added Dead Boot Repair via USB
    • LG F200S - added Dead Boot Repair via USB
    • Samsung GT-B5512 - added Dead Boot / Device Repair via JTAG
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three next steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

 

 

Download Medusa Box Software v.2.4.8