Medusa Box v.2.4.3 is out! Added boot repair via USB and small TP for LG E980, E980H, LG E985T, E986, LG E988, LG E989

2014-12-26 14:13:01

We have added boot repair via USB and small TP for LG E980, E980H, LG E985T, E986, LG E988, LG E989, which are detected by PC as "Qualcomm HS-USB QDloader 9008" device! Also added repair via JTAG interface for Gigabyte GSmart G1317D.

Medusa Box v.2.4.3 Release Notes:

  • Added support for the following models:
    • LG E980 - added Dead Boot/Device Repair via USB.
    • LG E980H - added Dead Boot Repair via USB.
    • LG E985T - added Dead Boot Repair via USB.
    • LG E986 - added Dead Boot Repair via USB.
    • LG E988 - added Dead Boot Repair via USB.
    • LG E989 - added Dead Boot Repair via USB.
    • Gigabyte GSmart G1317D - added Dead Boot Repair (thanks to Mr. Dr_Wolodya).
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair mentioned above devices via USB, please follow the next three steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

Download Medusa Box v.2.4.3