Medusa Box Software v.2.5.3 is out! We have support for LG VS930, LG F160L, TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

2015-04-03 13:33:09

Medusa Box Software v.2.5.3 is out!

We have added Boot Repair via USB and small TP for LG VS930 and LG F160L and via JTAG for TeXet TM-3200R, Crius Q7A and Huawei G520-0000!

Medusa Box Software v.2.5.3 Release Notes:

  • Added support for the following models:
    • LG VS930 - added Dead Boot Repair via USB
    • LG F160L- added Dead Boot Repair via USB
    • TeXet TM-3200R - added Dead Boot / Device Repair via JTAG (thanks to mr. Drunya_L)
    • Crius Q7A- added Dead Boot / Device Repair via JTAG (thanks to mr. DZ_Developer)
    • Huawei G520-0000 - added Dead Boot Repair via JTAG (thanks to mr. Dr_Wolodya)
  • All pinouts and Repair procedures are described in the manual ("Help" button in Software).

To repair LG VS930 and LG F160L via USB, please follow the next three next steps:

  1. Attach testpoint as shown on Figure 1 in the Software manual and connect your phone using Micro USB cable directly into the motherboard’s USB port (do NOT use any USB hubs!)
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn’t installed the driver yet. Drivers are in {Installation_Folder}\Driver\QHSUSB
  3. Release testpoint and press “EasyRepair” button in the software (or “Connect” button, when in Advanced Mode)

 

Download Medusa Box Software v.2.5.3